1. Mehran Kadkhodayan , L-bending analysis with an emphasis on springback , 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processe , 0000-00-00
  2. Mehran Kadkhodayan , Iman Zafarparandeh , Masoud Tahani , U-Bending Analysis with an Emphasis on Influence of Hardening Models , The 7th Iranian Aerospace Society Conference , 0000-00-00
  3. Mehran Kadkhodayan , AN INVESTIGATION TO THE SPRINGBACK OF REVERSE , 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processe , 0000-00-00
  4. Mehran Kadkhodayan , Springback measurment in reverse cup drawing prorcess , 16th Annual (International) Conference on Mechanical Engineering , 0000-00-00
  5. Mehran Kadkhodayan , An analytical solution to investigate the springback in unsymmetric Al-Steel wide laminates , 16th Annual (International) Conference on Mechanical Engineering , 0000-00-00
  6. Mehran Kadkhodayan , مطالعه تحلیلی چروکیدگی پلاستیک لبه صفحات گرد با کمک ورق گیر و با استفاده از تئوری تغییر شکل بزرگ در فرایند کشش عمیق , هشتمین کنفرانس بین المللی هوا فضای ایران , 0000-00-00
  7. Farzad Moayyedian , Mehran Kadkhodayan , The Effect of Blankholder on Flange Plastic Wrinkling of Laminated Circular Plates in Deep Drawing Process , دهمین کنفرانس مهندسی ساخت وتولید ایران , 0000-00-00
  8. Mehran Kadkhodayan , Rasoul pourhasan , Springback simulation of friction aided deep drawing process , Iran International Aluminum Conference-IIAC2009 , 0000-00-00
  9. Mehran Kadkhodayan , Farzad Moayyedian , An analytical study on elastic flange wrnkling of laminated circular plates in deep drawing process , 17th International Conference on Mechanical Engerring , 0000-00-00
  10. Mehran Kadkhodayan , An Investigation into the Optimization of Loading Path in T-shape of Tube Hydroforming , 10th International Conference on Numerical Methods in Industrial Forming Process, Numiform 2010 , 0000-00-00
  11. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , ehsan masoumi khalil Abad , Application of Neural Network and FEM to optimize ‎load path of T-shape tube hydroforming , دومین کنفرانس بین المللی ساخت و تولید (TICME 2007) , 0000-00-00
  12. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , Necking prediction in tube hydroforming by stress-based forming limit diagrams , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 0000-00-00
  13. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , The effect of anisotropy on forming limit diagrams based on bifurcation analysis , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 0000-00-00
  14. Mehran Kadkhodayan , Iman Zohourkari , An Investigation into the Springback in Bending of Unsymmetrical Sheet Metal Laminates , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 0000-00-00
  15. Farzad Moayyedian , Mehran Kadkhodayan , Elastic-Plastic Flange Wrinkling of Circular Platesin i Deep Drawing Process , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 0000-00-00
  16. Mehran Kadkhodayan , Ahmad Erfani Moghadam , Mehdi Heidari , Loading Path Optimization of T-shape Tube Hydroforming Process , 13th International Conference on Metal Forming , 0000-00-00
  17. mahdi maarefdoust , Mehran Kadkhodayan , Simulation and analysis of hot forging for industrial locking gear elevators , 10th International Conference on Numerical Methods in Industrial Forming Process, Numiform 2010 , 0000-00-00
  18. saeed amirnezhad , Mehran Kadkhodayan , Hamid reza Fazli shahri , A numerical and experimental study on bending ability of glass fiber metal laminate composite , The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2) , 0000-00-00
  19. , Mehran Kadkhodayan , An experimental and numerical investigation of wrinkling in deep-drawing of fiber-metal laminates , International Conference of Technology of Plasticity , 0000-00-00
  20. A. Einafshar , Mehran Kadkhodayan , Jalil Rezaee Pazhand , APPLYING DYNAMIC RELAXATION METHOD IN BENDING ANALAYSIS OF MULTILAYER COMPOSITE PLATES WITH DIFFERENT GEOMETRICAL CIRCULAR SHAPES , 23rd Canadian Congress of Applied Mechanics, CANCAM2011 , 0000-00-00
  21. Mehran Kadkhodayan , A. Hosseini , The Effect of Blank Holder Gap Profile upon Section Thickness Distribution in Deep Drawing Process , ICME2011 , 0000-00-00
  22. Mehran Kadkhodayan , A. Hosseini , The Optimization of Blank Holder Gap Profile in Deep Drawing Process , ICME2011 , 0000-00-00
  23. Mehran Kadkhodayan , ehsan afshin , AN EXPERIMENTAL STUDY ON WARM DEEP-DRAWING PROCESS OF LAMINATED SHEETS UNDER VARIOUS HEAT TREATMENTS , Forming Technology Forum 2014 , 0000-00-00
  24. Mehran Kadkhodayan , ehsan afshin , Thinning behavior of laminated sheets metal in warm deep-drawing process under various grain sizes , Numerical Methods in Industrial Forming Processes (NUMIFORM2016 , 0000-00-00